ID Thermal

Untitled Document

Untitled Document


	Spray Polyurethane Foam Insulation
	Spray Cellulose Insulation
	Thermal Ignition Barriers
	Spray Fiberglass Insulation
	Exterior Insulation Finish Systems (E.I.F.S.)
	- DRYVIT®
	- STO®
	- BASF®
	Protective Coatings

OUTSULATION® SYSTEM

Dryvit Outsulation® System

Class PB EIFS System that function as an insulation blanket for the building. It is a highly energy efficient insulated cladding system that places insulation on the outside of the wall, The energy efficiency of outsulation is provided by the expanded polystyrene (EPS) insulation board used, which increases in efficiency with the increase in EPS thickness. Up to 4" of EPS can be installed on the outside of your wall, giving an R-Value of 15.4. Since the insulation is placed on the outside of the studs and sheathing, none of this R-Value is lost due to heat transfer through the studs. Up to 30% of R-Value can be lost when conventional batt insulation is used because of the breaks in the insulation where studs are located.

Data Sheet			Brochure
MSDS			LEED Data

OUTSULATION MD® SYSTEM

Dryvit Outsulation MD® System

Is a commercial System Incorporating An Air and Water-Resistive Barrier Coating with a Means of Positive Moisture Drainage, Outsulation MD offers the most comprehensive, easy-to-install drainage system available for commercial use today. It provides three lines of defense against water intrusion. The first is Dryvit’s time-tested combination of reinforced base coat and finish. The second is our specially-designed, grooved EPS with drainage track and vent assembly. The third is Backstop NT, an air and water-resistive barrier. A waterproof flashing material such as Dryvit AquaFlash System or flashing tape is also used to protect sills of wall openings (such as windows). A compatible sealant must be utilized at all system terminations.

Components - Look Inside the Outsulation MD System:

Backstop® NT Air/Water-Resistive Barrier Coating (available in Texture or Smooth)

Dryvit Grid Tape™

Dryvit AquaFlash™ System or Flashing Tape™ and Surface Conditioner™

Dryvit Vent Assembly™

Dryvit Track and Vent Track™

Dryvit AP Adhesive™ to Adhere Dryvit Track and Vent Track

Dryvit Adhesive in Vertical Notched Trowel Configuration

Insulation Board with Channels

Dryvit Reinforced Base Coat

Dryvit Finish

Data Sheet			Brochure
MSDS			LEED Data

Untitled Document